Find the right product(s) for your CNC manufacturing processes.

An automated probe setting device for accurate, repeatable and in-process probe checking and calibration.

Software which analyses the geometric performance of a CNC machine tool to show immediately whether the machine is capable of producing parts to tolerance.

Software which analyses your part to check it’s condition of supply and automatically generate an accurate alignment for the part, compensating for issues like distortion or no datum points.

Fundamental accuracy for the whole machining process and accurate probe calibration and probing data.

Calibration of the probe in 5-axis and knowledge about whether your machine will produce parts to tolerance.

Accurate alignments for your parts to eliminate scrap, rework, or concessions.

• You want to speed up setting the work offset.
• You want full 24/7 lights out automation of your CNC machining process.
• You want micron accuracy for your probe setup.

• You want to understand part to part variation across machines.
• You want to predict maintenance and schedule it in only when needed.
• You want to see how your machine is performing in real time.

• You have complex parts that are difficult or time-consuming to align.
• You need to eliminate high scrap or rework levels.
• You need to increase part production without increasing numbers of machines.

AutoClock is on the machine tool bed and connected to a PC next to the machine tool via Wi-Fi and the PC connected to the controller via a network.

*Please note, if you do have Wi-Fi restrictions, we can offer an alternative secure connection.

NC-Checker is installed on a PC which is connected to the controller via a network. A single program is run on the controller.

NC-PartLocator is installed on a PC which is connected to the controller via a network. A single program is run on the controller.