Update your browser to view this website correctly. Update my browser now
Fine-tune your machine tools with at-a-glance diagnostics and precise calibration. Results? Increased capacity. Reduced inspection. Zero scrap.
With NC-Checker, you’ll see exactly where your machine tools are underperforming.
Our benchmark reports give you all the data you need to pinpoint where the problem is.
Benchmark reports clearly set out how your machines are underperforming and whether you can make a part to tolerance. Your maintenance team can get straight to the problem and improve the parts you make.
NC-Checker allows for planned maintenance. Trend reports enable you to anticipate machine failure, instead of production emergencies and machine downtime.
Is your machine as good today as it was yesterday? Does machine A differ from machine B? Has temperature affected performance? Our benchmark comparison shows you.
NC-Checker can assess the capability of your machine tool and identify any errors present. These can then be removed before any material is cut - giving you complete confidence in your production cycle and machine tool.
NC-Checker's benchmark accurately reports on the movement of the probe tip, to make sure the machine is doing exactly what it has been asked to do.
If you run the machine twice and there’s variability in the benchmark, it means the machine or the probe has changed (everything else – the software and MSP macros – stay the same). Next task? Find out why.
NC-Checker is a rich comparison tool. If your maintenance team says the machine is fine, and the parts are OK on the CMM, we use this information to set the tolerances and generate a green benchmark.
Then all you need to do is look for any drift away from that green benchmark – as long as you’ve sorted the variability, of course.
NC-Checker is a powerful, time-saving tool for maintenance: it tells your team what to look at, and which Renishaw products will sort the problem.
For instance, NC-Checker’s benchmark will show your maintenance team when to take the machine down to use Ballbar, Laser Cal, or kinematic updates of the TRAORI table. And if the benchmark is green, there’s no need to do anything at all: so no more downtime for that routine laser check.
The team can also use NC-Checker to show that the machine has been improved after a maintenance intervention. Benchmark the machine before any work, then again afterwards: it should have improved. And if it hasn't, you know more work is needed, or the part quality from that machine will be affected.
NC-Checker can show benchmark trends – so you know when a machine needs attention, and you can plan preventive maintenance, as opposed to production emergencies and unplanned machine downtime.
Why do certain machines make good parts, and others make bad ones? NC-Checker gives you an answer at a glance. Here’s how.
Every machine has a specific benchmark signature: the non-uniform circle on the benchmark report. Any difference in these signatures across machines shows you precisely where part-to-part variation is coming from. Fix the difference in the machines, and you’ve fixed the variation in the parts.
Fully automate NC-Checker, and no-one needs to be there to run it. Run the software in quiet periods – overnight, for example, and the benchmark report is produced automatically.
For both 3 and 5-axis machines, we provide MSP’s world class probe calibration ensuring maximum accuracy throughout your probing processes.
Some aspects of the calibration are manual – like clocking in the sphere, for example. Once you’ve calibrated it, it’s good for 3-6 months and only needs repeating if:
Take care with the calibration sphere: it’s a scientific instrument and the quality of the calibration will be affected if it gets knocked, dropped or damaged.
NC-Checker doesn’t just give you the benchmark report. Behind each check is a copious amount of data: interrogate it, and you’ll see where and how an error for any check manifests itself across the machine, for every axis. Maintenance teams can use these reports to create an action plan to fix the machine – or work with your machine tool partners, who will know exactly what to do. All detailed reports are archived against the machine, date and other criteria for full traceability. The benchmark is a summary of these reports.
If you are an existing customer who requires support with our products, visit our dedicated support pages here.
Our fast, responsive support service is entirely manned by experienced engineers, with the aim of keeping your critical business operations running with minimal disruption. As valued support customers you will receive unlimited support and gain the benefits of receiving the latest software features with your annual software upgrade.
What's included with Support Plus?
Get expert advice and support from a dedicated MSP Applications Engineer. Our support includes one-to-one assistance with everything from queries about your benchmark reports to machining process hints and tips.
Every install is delivered with three months’ warranty support. But when you add Support Plus to your order, you get a whole year of unlimited support. It means you can pick up the phone or send us an email anytime, for detailed support on everything from a failed benchmark to advice on implementation of processes.
We’re always improving our software with new features and updates. With Support Plus, you’ll get software upgrades every year. And we’ll always give you everything you need to know about our new software releases, to help you decide which version is right for you. With a Support Plus contract, an MSP engineer will be on-site to upgrade and benchmark your machine, and train up to four operators to use the new features.
For more information about how to become a Support Plus customer, get in touch with our team.
Of course, we can chat by email. But often a phone call is how we get to the heart of your problem: fast, personal, effective.
We’ll check the compatibility of your machines and controllers remotely, to be sure we’re giving you the right solution.
We’ll install NC-Checker on your machines, and work with you to achieve the right machine state for the part tolerances.
We’ll show you what the first benchmark report means – and how to recognise when you need to call maintenance, and when to carry on with production.