MSP PerfectPart Support

MSP PerfectPart 2021

← Back to all software releases

At a glance

MSP PerfectPart 2021 brings more features and improvements for the user. This release includes NC-AutoClock which enables the user to run the AutoClock process, calibrate the probe and find out if their machine is in tolerance at the press of a button. Important functionality has also been added for feature and hole offsets which will help users cut parts more accurately.

5
New Features
8
Improvements

New Features

1

NC-AutoClock for automated probe setup

With NC-AutoClock, you can run the AutoClock device process and then automatically run NC-Checker processes afterwards at one press of a button.
NC-AutoClock for automated probe setup
2

3D position of a feature for hole and surface offsets

Functionality has been added to use feature offsets from planes and lines rather than single point offsets.
3D position of a feature for hole and surface offsets
3

Radius offsets for cutter compensation

MSP PerfectPart now automatically updates the cutter compensation values to ensure bores / holes are cut to the perfect diameter every time.
Radius offsets for cutter compensation
4

Support for Mazak Matrix 2 API

MSP PerfectPart now supports the Mazak Matrix 2 API on Matrix controllers.
Support for Mazak Matrix 2 API
5

Programmable tolerance setting for NC-Checker programs

This new feature makes it possible to diagnose issues on the machine more specifically. 
Programmable tolerance setting for NC-Checker programs

Improvements

1

Use of Heidenhain tab files

This improvement means MSP PerfectPart is now compatible with all versions of iTNC 530 and 640 controllers.

Use of Heidenhain tab files
2

Increased reliability of controller connections

In certain situations, the connection to the controller now remains open so dealing with restarts or cancelling processes is handled more robustly.

Increased reliability of controller connections
3

Changes to the file editor

The file editor has been enhanced to improve the user's file editing experience.

Changes to the file editor
4

Additional translations in reports

Language support has been extended to cover the full  MSP PerfectPart interface, including all reports.
Additional translations in reports
5

Updates to NC-Inspect CATIA

There have many updates in various areas of the plugin for CATIA.
Updates to NC-Inspect CATIA
6

Serial numbers now accept additional characters

It is now possible to add in additional characters for Serial Numbers, instead of just letters and numbers.
Serial numbers now accept additional characters
7

Automated probe calibration

It is now possible to run the 3 stages of the NC-Checker Probe Calibration program automatically.
Automated probe calibration
8

Colour-coded Archives tab

The user can now easily see if a process has passed, failed, was cancelled, overridden or had a fatal error based on the colour.
Colour-coded Archives tab
Ask for more information today
← Back to all software releases

Ask about upgrading.

Get in touch if you would like to upgrade your software to the latest release. You don't need an active support package and it can be completed at a convenient time for you and your production.

Get in touch with our support team here.