Do you ever wonder why the same parts made on the same machine don’t come out the same? You might have one machine making identical parts, or identical machines making identical parts – but the parts never end up the same.
This part-to-part variation is a frustrating challenge, especially on 5-axis machines.
By the time you’re measuring parts on a CMM, it’s too late. And you may have five more parts ready to measure that you now know are wrong. The errors are already in the part — but where did they come from?
Did someone make a mistake setting up the probe? Was there an error in one of the rotaries on the machine? Was the part misaligned in the machine?
That’s where NC-PartLocator from MSP PerfectPart comes in. NC-PartLocator eliminates any errors in the probe setup, machine setup or part setup.
NC-PartLocator streamlines the entire machining process by automating probe setup, checking machine performance, and ensuring every part is aligned and verified accurately on the machine. This whole process is automated and repeatable across multiple parts and machines to guarantee the accuracy of your finished parts.
Finally, the part can be inspected on the machine so you know it’s accurate before you remove it from the fixture. As far as the machine tool’s concerned, the part is accurate to the tolerances required to pass it off, and our CMM transfer standards will keep your quality team happy.
Perfect parts. Every time. On any machine.
Let MSP PerfectPart help you, get in touch using the form below.
